Interface |
USB |
Charging |
5V 1A |
Battery |
3.7V 2200mAh |
Runtime |
About 4 hours |
Working voltage |
3.4-4.2V |
Working current |
0.2-2A |
Working temperature |
10℃-45℃ |
Roll angle |
-90°-90° |
Pan angle |
-160°-160° |
Tilt angle |
-160°-160° |
Product Keywords |
3 axis handheld gimbal selfie stick ,3 axis gimbal smartphone |
Product show

Product Display
1.Smartphone Bracket: Holds smartphone steady.
2.Pan Motor: 320° rotation, responsible for the left and right stabilization of the picture.
3.Charging indicator: When charging. red light always on. Fully charged, green light always on.
4.Joystick: Adjust the shooting angle up, down, left or right according to the pushing direction.
5.Mode switching: Locked mod(The camera faces the fixed direction); Half-follow mode(Turn left or right correspondingly with handle): Full(the framing picture follows the direction of rotation of the handle while following the direction of the handle pitching operation.
6.1/4 Threaded Hole: Tripod bracket interface.
7.Shooting Mode: Connect BT in power on state,and click it to control picture shooting and video recording.
8.Power ON/OFF:
Long press 3 seconds to power on. Long press 3 seconds to power off.
Double-press the power on key, and the stabilizer returns to the initial setting.
9.Working status indicator:
Power ort red and Green flashing.
Standby: Green light always on.
State transitiort Green light flashing.
Low voltage: Red light flashing.
10. Tilt Motor: 320° rotation,responsible for the up and down stabilization of the picture.
11.Balance adjustment arm:
Responsible for balancing the horizontal direction of mobile phone.
12. Balance Knob: Balance bracket position fixed knob.
13. Roll Motor:180° rotation,
Responsible for holding the mobile phone to a vertical position with the handle.
14. Bracket locking knob: Lock mobile phone bracket.
15. Micro-USB Charging Port: Insert Micro-USB cable to charge the stabilizer.








