17 дюймовый алюминиевый замок KMC кованые колеса пикапа и внедорожника отрицательный офсет обода 139 7 для jeep Ford

WHAT IS A TRUE BEADLOCK WHEEL?
If you’re wondering where this style originated from, it is said to have its roots in military applications, but was popularized by the off-road racing and rock-crawling communities. Originally, beadlock wheels were formulated to prevent wheels from dismounting when placed under tremendous torque loads and lower tire pressures.

In short, a “beadlock” is the clamping of a tire’s bead between an outer and inner ring that is attached to the wheel. This sandwich effect creates ample pressure to keep the “bead” of a tire locked into place—hence, the term “beadlock.”

Both the outer and inner rings of a beadlock wheel span the entire circumference of the rim. The outer ring is bolted against the inner ring of the rim. The inner ring is either welded onto a wheel after its been made (this is called a beadlock conversion) or it can be manufactured in place if it is a purpose-built beadlock wheel.

WHY USE A BEADLOCK WHEEL?

Off-road applications are a very different story, In order to gain better traction in loose dirt, sand, over uneven rocks, snow or other rugged surfaces, drivers often “air down” their tires. That is, they deflate their tires with the aim of increasing the size of the contact patch of their tire to the surface. This allows them to attain much better traction, and the extra pliability of the slouching tire’s sidewalls are less prone to puncture, since it will just flex around sharp rocks, versus being punctured by them. Another bonus is that it can be more comfortable to ride in a vehicle with gummybear-like, aired-down tires, as well.When air pressure is decreased in a tire mounted to a regular wheel, the tire’s bead has less air pressure pushing it against the rim. If the pressure goes down low enough, the bead can start to slip against the rim, creating the danger of the bead actually coming off the rim, and inadvertently allowing the tire to slip off the wheel entirely. That’s a bad day right there.This is where beadlock wheels come into play. Though it’s usually safe to air down your tires on your non-beadlock wheels to an extent (depending on tire size, type, wheel size, vehicle weight and terrain), but it’s surely not recommended to air them down to the level that beadlock wheels can handle.Those who intend on driving onto terrain requiring serious traction may need to air their tires all the way down to as little as three to six psi, or even lower. If you’re going to do that, you’d better be doing it with beadlocks that will physically lock the tire bead into place, so that the rim doesn’t slip the tire off of itself.

let's see how it's look while beadlock wheels on truck/ pick up!

The Questions You Are Concerning 

(FAQ = frequency asked Questions)

1: What is your Minimum order quantity ?

Our minimum order quantity is 1 pieces . However,customer are usually advised to start with 4-5 pieces.In this way, it is well istallation on cars for using, and 1 is spare wheel.

2: What is your price ? does the list price are real ?

The listing price are just reference, exact unit pirce has many part to decide : the material / size / quantity . 

3: What is weight of your wheels? 

There has many design of wheels with different weight while in different size . But according to experience ,18x9.5J forged wheels about 8.5kg each wheel / 19"x9.5J ~9.5kg . Exact wheel weight will reply on design / max loading / size etc.

4: What material you keeps ?

Forged wheels in our factory always using Aerospace Grade Materials- T6061 as basic material. Beside ,there are still carbon fiberglass / magnesium alloy/ steal wire and so on. 

5: What is Max loading ?

Normally we are doing 690kg each wheel for car , and 960kg each wheel for pick up / truck /van . But if you has any idea about max loading , we can control wheels to meet your request.

6: Can you tell me the effort of logo on wheels ? 

Sure , you can put any logo you want in wheels, any position is fine : spoke / inner / outer .Just show us the logo you want and our desginer will show how it's look , you can change whenver you want ,we have 1-1 service .

7: How long is production for wheels ?

Usually 15working days after confirmation details for small quantity .

8:How to solve the quaulity problem after sales?

(1) Take photos of the problems and send to us;

(2) Take videos of the problems and send to us;

(3) When we comfirmed its our problem, after communication with customers, we will return the amount of problem goods, or cut this amount in next order, and make new production and sent immediately, or sent together with next order according to customers’ requirement.

TF manufacturer is full of technology and design to provide customer with suitable and exquisite wheels for car and clinet. So if want get free drawing of your idea / thoughts , pls click here !