Китайская фабрика, нейлон PA66/PA6/MC, нейлоновый стержень
- Категория товара: PA >>>
- Поставщик (Оптовый магазин): Shandong,Shing,Chemical,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
China factory Nylon PA66/PA6/MC Nylon Rod sheet
Advantage:
It has good tenacity,anti-earthquake capability.
It have the higher machine strength and good bearing heat,
The better anti- washest strength,the higher fusion point, the good property of molding process,the good property of absorb water,
The rate of the saturation is about 11%,and easy to fusion to sulfuric acid hydrexybenzene or the low temperature of frailty is below zero 20 degree - 30degree.
MAIN PROPERTIES
Item | Unit | Result | |
PA | PA6(cast) | ||
Density | g/cm3 | 1.05 ~ 1.15 | 1.18 |
Elongation At Break | % | 40 ~ 75 | 50 ~ 70 |
Tensile Strength | Mpa | 50 ~ 85 | 75 ~ 85 |
Temperature Range | ℃ | -40 ~ 100℃ | -40 ~ 90℃ |
Dielectric Strength | KV/mm | 30 | 28 |
TYPES AND SPECIFICATIONS
Type | Thickness(mm) | Width(mm) | Length(mm) |
Sheet | ≤ 100 | 500 ~ 1000 | 500 ~ 2000 |
Type | Diameter(mm) | Length(mm) | |
Rod | 6 ~ 50 | 500 ~ 100 | |
Extruded Tube | 3 ~ 24 | Any Length | |
Tube | Outside Diameter(mm) | Length(mm) | |
40 ~ 500 | ≤ 1000 | ||
Application:
PA is widely used ifor friction bearing,sliding&trabsmission parts,pipe clamp,clutch parts,gears,guide rails,and other mechanical parts ect.
Похожие товары
