Please be noted that battery type and CCA values(Cold Cranking Amp)
marked on the battery label, please refer to it before using.
FBT-200 supports the following types.
1. VRLA/GEL/AGM/EFB/STD
2. Regular Flooded
Specifications
Display: 2.7" LCD
Cable reach: 650mm (25.6 inches)
Storage Temperature: -20'C to +70'C (-4'F to 158'F)
Working Temperature: -20'C to +60'C (-4'F to 140'F)
Dimensions(L*W*H): 150*90*35mm(5.9*3.54*1.38 inch)
Weight: 325g(0.72lb)
Testing range:100 ~ 2000 CCA, 100 ~ 1400 DIN, 100 ~ 1400 IEC, 30 ~ 220 AH
Input voltage range:6V~30V
System voltage:12 Volts--24Volts
Power:8 to 16 Volts provided via vehicle battery
Important
1.Use this tester in accordance with there instructions, taking into account the working conditions and the work to be performed. Use of this tester for operations different from those intended could result in a hazardous situation
2.Before testing, make sure the battery terminals are really clean as grease and dust could lead to errors in the test results.
3.Wear eye protection when working around batteries.
4.Check the insulation layer of the battery clamps is in normal condition(no damage, bareness or disconnection),in case of the electric shock.
5.Test in a well-ventilated area. Explosive and toxic gases may be produced during testing
1.Keep hair, hands,and clothing as well as tester leads and cords away from moving blades and belts.
2.The tester is not a toy. keep it out of the reach of children.
3.Do Not place the tester near the engine or exhaust pipe to avoid damaged by high temperatures, when the car engine is running.
4.Do not smoke, cause sparks, or strike matches near the battery whentesting
5.Do not remove battery clamps while testing
6.Do not put the tester into a highly humid, dusty environment.
Do not disassemble the tester, or may cause damage