1.Wrap the packing tape as shown in the figure, and place one end of the tape at the bottom.
2.Lift the handle with your right hand, insert the strap with your left hand, stack the top and bottom in parallel, and release
the handle.
3.Press the tension switch, release the switch button after the tensioning strength of the strap is reached.
4.Press the welding button, the hand leaves immediately, the plastic-steel belt is welded and the excess packing belt is cut off,
and the welding is completed.
5.Lift the handle, loosen the strap, and pull the baler to the right, away from the strap.