Поделиться:



The cytocentrifuge is designed for the concentration of biological samples on a surface which can be seen with a microscope and its subsequent identification and characterization.
Its easy use reduces the handling time, which is essential in oncology, cytology, hematology, virology and microbiology services.
It is provided with rotor for 8 or 12 holders which can recover the strain for its processing depending on the position of the containers. Another advantage is that some rotor for tubes, microtubes or plates can be adapted.
User friendliness
\tUser friendly sealed holders which prevent the leak of the sample.
\tFast identification of microorganisms.
\tDetection of cells even in low-concentrated liquids.
\tLCD screen which shows RPM/RCF, time, temperature and deceleration.
\tIntuitive use with start, stop, lid opener and short centrifugation buttons.
\tAutomatic rotor recognition.
\tAutomatic lid lock.
\tControlled by microprocessor.
40 memories.
\tBlocking/modifying option of RPM/RCF while operating.
\tAcceleration control and up to 175 ramps for a progressive deceleration.
Features
\tInduction motor, maintenance free.
\tNoiseless <60 dB.
\tRotor list on memory.
\tOpen lid automaticaly selectable.
\tPossibility for adapted some rotor for tubes
Safety
\tLid lock and protection against the opening while operating.
\tManual overriding for emergency.
\tUnbalance switch off.
\tChamber of centrifugation in stainless steel.
\tPort of view on lid for calibration and check the operation.
\tContinuous check of the equipment, shown by messages on the screen.
\tGuard ring between the chamber of centrifugation and the housing.


Name Model | Max. speed | Max. RCF | Capacity |
Cyto smear rotor | 1100rpm | 750xg | 8 / 12 holders |
Angle rotor | 4000rpm | 2250xg | 12 tube 15ml |
Angle rotor | 4000rpm | 2250xg | 4 tube 50ml |




The PRP products and small machines will be packed in this Carton box.
The large machine and heavy products will be packed in this plywooden case.

Shipping Ways | |||||
By Carrier | 1. It is the fastest way. Normally 3-7 days arrive. 2. It will send the goods to your door, no need you pick up the goods. 3. The shipping cost is high. | ||||
By Air | 1. it is by air, normally arrive in 7-10 days. 2. It will send the goods to your local airport, you should do the custom clearance and pick up the goods from the airport. 3. The shipping cost is lower than carrier and higher than by sea. | ||||
By Sea | 1. It is long shipping period, normally in 20-40 days arrive. 2. it will send the goods to your local Seaport, you should do the custom clearance and pick up the goods from the sea port. 3. Normally in large quantity and low shipping cost. | ||||








91.8% Response Rate
91.8% Response Rate
91.8% Response Rate