Cloudray DM21 Leadshine 2-фазный шаговый двигатель контроллер драйвера для гравировальной машины

Поделиться:


Цена:
Стоимость в USD:Узнать цену

Количество:

Купить

Описание и отзывы


Характеристики



Product Description


 DM542-(2)_01.jpgDM542-(2)_02.jpgDM542-(2)_03.jpgDM542-(2)_04.jpg









If your product is similar to the detail drawing, please feel free to contact us if you do not confirm



 





Certifications


Cloudray_01.jpg 





Application


 





Our Company


Cloudray_03.jpg 





Our Service


Cloudray_04.jpg 





Feedback


♥♥Satisfaction give 5 Star   


If you are not satisfied,please contact us,we will sure give you satified solutions,if you are satisfied with our products,please remember to give 5 starts,to supports.Thanks!


Cloudray_05.jpg


 


 Thank you for visiting our website. If you have any questions, please feel free to contact us.





FAQ


Q1: How was the motor's life time?                                              


A: The key factor effect motor’s life time is two bearings inside the motor. Normally, the standard bearing’s life time is about 6000 hours long time continuous working.


                                                                      


Q2: What’s the advantage of integrated stepper motor?                                           


A: Integrated Motor is meaning a stepper motor integrated a stepper driver, sometime Integrated an encoder also. There are much of advantage of integrated motor when comparing with motor & driver are separately, but separated motor and driver have their advantage too.


 


Q3: What is the signal current of the closed-loop driver?                           


Normally, the signal current is about 10mA.


 


Q4: How to calculate the speed according to frequency(PPS)?                                        


A: Simply, we have provided a formula: v=f/n
v: motor speed(rps) f: frequency(pps)
n: number of micro step, you can find it on stepper driver.
eg: When stepper motor driver receiving frequency 4000pps from controller, and mirco step setting on the driver is: 2000, the speed of motor is: v=4000/2000=20rps=1200rpm


 


Q5: Does the closed-loop driver have a position error alarm output?                                  


Yes, closed-loop stepper driver has position error alarm output, you can set the value on debug software.


 


Q6: Does the closed-loop driver have pulse compensation?                          


Yes, it has pulse compensation function, but the compensation is limited.




0.0049 s.