Soldadura exotermica цена
- Категория товара: Welding Fluxes >>>
- Поставщик (Оптовый магазин): Xinchang,Tuan,Machinery,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
| Product Parameters |
| Good Mechanical Performance | There is no residual stress, permanent strong joints, good tensile strength and other mechanical properties. |
| Strong current Load Capacity | Solder joints and metal conductors are molecular binding. The solder joint current carrying capacity equal to conductor . DC resistivity change close to zero after the welding point. |
| Resistant To Large Repeated Current | The joint's melting point is equivalent to the conductor, can withstand repetitive high current (fault) the impact, the joint no fuse phenomenon. |
| Convenient And Safe Construction | No need outside energy, professional equipment and professional welding operator, can be operated safely indoors and outside, short welding time . |
| Controllable welding Temperature | The product can achieve different reaction temperatures (up to 3400 ℃) by adjusting the ratio of the flux |
| Material | Graphite |
| System Content | Graphite Mold, Flint Gun, Heat Resistant Glove, Fastening Clamp, Metal Disc, Powder, Steel Brush, Banister Brush, etc. |
| Characters | Cost-effective, no extra power required makes it portable |
| Life | About 80 times |
| Operation | Easy and nospecial skill needed |
Operation Instruction
l Check to ensure the graphite mold and conductor is clean ,no residue before making the connection
l Use a propane torch to dry wire conductors and remove remaining cleaning residue, solvent, or water before making the connection.
l Close the graphite mold lid before ignition ,and close the lid tightly
l Insert the conductors and position them for the connection.Ensure them in the center of cavity.
l Keep the irrelevant personnel 1.5M away when welding
l Keep the inflammable goods 1-2M away when welding
l The operator must be equipped thermal barrier glove
l Don’t face to the mould opening when welding
l The operator keep 1.5M away mould is must after ignition
l Don’t touch the mould and connected parts directly after welding
l Open the mould and take the joint out with wrench 10-20S later after reaction .
l Insulate the joint after the conductor cooling completely .
| Why Chooes Us |
| Transaction Flow |
| FAQ |
| Question | Answer |
| 1. Are you factory or trader? | We are professional manufacturing factory |
| 2. How to order? | Normally the customer can order our products by Alibaba platform or contact our representative by Email. |
| 3. Do you accept OEM manufacture? | Yes. |
| 4. What's your lead time? | Generally,the lead time is about 20 days after getting your down payment,the real time depends on your |
| 5. what's your payment Term? | Generally, 30% down payment and the remained should be effected before shipping. |
| 6.Where is your nearest port? | Ningbo or shanghai, both of them are about 3 hours ride. |
Похожие товары
