Полностью автоматическая птицеферма, устройство для переработки пищи и перьев
- Категория товара: >>>
- Поставщик (Оптовый магазин): Ningbo,Connect,Machinery,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
1.This equipment have advantages of compact system, Smooth transmission, low noise, Easy installation, Easy maintenance, Reliable
operation, Energy savings, etc.
2.It is using the most advanced modular sealing structure, with a high wear resistance and sealing, meanwhile, has the
characteristic of High temperature, can resist the erosion of various types of chemicals.
3.The transmission of Batch Cooker is chain drive system, which has the characteristic of Smooth transmission , vibration , wear ,
etc.
4.The machine uses inflatable rotor shaft to accelerate the heat transfer between the body and the material which greatly improves
the work efficiency.
Principle of Operation
After raw material hydrolysis in cooker for 30 minutes, Stamp the seal to make temperature reach 130 degrees in order to kill the
E., and break the keratin molecules ,keep the working pressure for 15 minutes when it reaches 0.3mpa, discharge vapor in the tank.
Heating was continued for 20 minutes, then the discharge spout into the dryer for drying, Cooled and crushed into powder. so it
Becomes , protein content > 80 %, moisture <10% , tawny hydrolyzed Feather Meal . rendering Raw Material Handling Equipment. After
pressure relief, the odor is sent it to Odor System for further processing. The cooked meal will sent it to Meal Cooling Machine,
or sent it to Fat Press Machine to press the fat out
operation, Energy savings, etc.
2.It is using the most advanced modular sealing structure, with a high wear resistance and sealing, meanwhile, has the
characteristic of High temperature, can resist the erosion of various types of chemicals.
3.The transmission of Batch Cooker is chain drive system, which has the characteristic of Smooth transmission , vibration , wear ,
etc.
4.The machine uses inflatable rotor shaft to accelerate the heat transfer between the body and the material which greatly improves
the work efficiency.
Principle of Operation
After raw material hydrolysis in cooker for 30 minutes, Stamp the seal to make temperature reach 130 degrees in order to kill the
E., and break the keratin molecules ,keep the working pressure for 15 minutes when it reaches 0.3mpa, discharge vapor in the tank.
Heating was continued for 20 minutes, then the discharge spout into the dryer for drying, Cooled and crushed into powder. so it
Becomes , protein content > 80 %, moisture <10% , tawny hydrolyzed Feather Meal . rendering Raw Material Handling Equipment. After
pressure relief, the odor is sent it to Odor System for further processing. The cooked meal will sent it to Meal Cooling Machine,
or sent it to Fat Press Machine to press the fat out
Model | Tank Dimension | Steam consumption(kg/h) | Capacity(t/batch) | Motor power(KW) | Reducer | ||
inner(mm) | length(mm) | ||||||
CZS1200 | 1200 | 3200 | 200 | 1.0(3000L) | 22 | JZQ650 | |
CZS1300 | 1300 | 4000 | 300 | 1.5(4500L) | 30 | JZQ 650 | |
CZS1400 | 1400 | 4500 | 350 | 2.0(6000L) | 37 | ZSY 280 | |
CZS1500 | 1500 | 4500 | 500 | 2.2(7000L) | 45 | ZSY380 | |
CZS1600 | 1600 | 5000 | 500 | 2.5(8000L) | 55 | ZSY355 | |
1.What is this machine used for ?
A: It is used for processing the slaughterhouse waste,dead animals, hatchery waste.
A: It is used for processing the slaughterhouse waste,dead animals, hatchery waste.
2.What is the capacity of this line?
A: This equipment is caculated with batch system. the min capacity is 0.5T/batch, then 1T/Batch, 2T/batch, 3T/Batch, 5T/batch,etc.
3.What is the raw materials?
A: Slgughterhouse waste, like feather, blood, bone,haslet. dead animals,like cattle, sheep, camel,pig,poultryetc,hatchery waste, like egg shells, bad eggs.
4.Can you design and install the project for us?
A:We have good design and installation department for help you on this project.So you can give me the building dimension ,then we make the layout for you, or we supply the suitable layout for you, then discuss with each other.
5.What is the product?
A: The final product will be protein mill, and if you work with oil press, there will be oil also.
6. What is the final product used for ?
A: The protein mill can be used for feed mill, and fertilizer,etc. The oil can be made to soap.
7.How many hours it cost for one batch?
A: it depends on the situation of raw materials, normally 4 to 6 hours, if the materials is too wet, so the time will cost more.
A: This equipment is caculated with batch system. the min capacity is 0.5T/batch, then 1T/Batch, 2T/batch, 3T/Batch, 5T/batch,etc.
3.What is the raw materials?
A: Slgughterhouse waste, like feather, blood, bone,haslet. dead animals,like cattle, sheep, camel,pig,poultryetc,hatchery waste, like egg shells, bad eggs.
4.Can you design and install the project for us?
A:We have good design and installation department for help you on this project.So you can give me the building dimension ,then we make the layout for you, or we supply the suitable layout for you, then discuss with each other.
5.What is the product?
A: The final product will be protein mill, and if you work with oil press, there will be oil also.
6. What is the final product used for ?
A: The protein mill can be used for feed mill, and fertilizer,etc. The oil can be made to soap.
7.How many hours it cost for one batch?
A: it depends on the situation of raw materials, normally 4 to 6 hours, if the materials is too wet, so the time will cost more.
8.How is Connect Group?
A: Connect Group is a company in China, which have his own trademark, Our group totally have seven companies, which including one poultry processing equipment manufacture, two rendering equipment manufacture, one broiler equipment plant, one fridge equipment construction plant, one trading company which responsible for marketing and Import and Export, and one Industrial company, we also cooperate with Netherland poultry processing equipment supplier JM to build fully automatic poultry processing plant, which covers the shortage of fully automatic Evisceration and cut-up equipment in China market. And our rendering plant equipment is the leading stage inside China.
9: Why we select Connect Group?
A:Connect Group is with the best service for the clients, from the first discuss, then following, delivery,installation, testing, maintanence, after service.
A: Connect Group is a company in China, which have his own trademark, Our group totally have seven companies, which including one poultry processing equipment manufacture, two rendering equipment manufacture, one broiler equipment plant, one fridge equipment construction plant, one trading company which responsible for marketing and Import and Export, and one Industrial company, we also cooperate with Netherland poultry processing equipment supplier JM to build fully automatic poultry processing plant, which covers the shortage of fully automatic Evisceration and cut-up equipment in China market. And our rendering plant equipment is the leading stage inside China.
9: Why we select Connect Group?
A:Connect Group is with the best service for the clients, from the first discuss, then following, delivery,installation, testing, maintanence, after service.
