Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE
Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE
Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE
Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE
Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE
Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE
Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE

Artificial Lift Coiled Tubing Gas Anchor for PC Pump 5 1/2"* 2 7/8"EUE

Share on:

Price:RUB 44,447.61
Price in USD:Details

Quantity:

Price request

Product Overview

Description

Product Description
Casing OD
Application
Tool Length
Tool OD
Tool ID
Inlet Port
Sizes
In
Inlet Flow Area
Outlet Port Sizes
Outlet Flow Area
Connections
EU
Box/Box
4"
LIGHT OIL
28.125
3.25
2.625
8*0.594
2.24
6*0.625
1.86
2 3/8"
4 1/2"
LIGHT OIL
29.76
3.625
2.875
8*0.750
3.53
6*0.813
3.12
2 7/8"
5"
LIGHT OIL
38.00
4.00
3.25
8*0.813
4.16
6*0.875
3.61
2 7/8"
5 1/2"
LIGHT OIL
37.80
4.50
3.25
8*0.813
4.16
6*0.875
3.61
3 1/2"
5 1/2"
HEAVY OIL
45.00
4.50
3.25
8*0.813
4.16
6*0.875
3.61
3 1/2"
7"
LIGHT OIL
39.475
5.50
4.25
8*1.125
8.00
6*1.250
7.37
4 1/2"
7"
HEAVY OIL
56.10
5.50
4.25
8*1.125
8.00
6*1.250
7.37
4 1/2"
9 5/8"
LIGHT OIL
49.65
7.00
6.25
8*1.500
14.60
6*1.625
12.44
4 1/2"
9 5/8"
HEAVY OIL
69.40
7.00
6.25
8*1.500
14.60
6*1.625
12.44
4 1/2"

Gas Separation for Efficiency

Baofeng PC Pump Gas Separator is a continuous flow downhole gas separator for use with progressing cavity pumps. The PC Pump Gas Separator uses centrifugal forces to separate the gas from produced liquids, before they enter the pump. Using the tool allows gas-free production fluids to be carried into the pump station while the separated gases are forced to migrate up the annulus. Eliminating the associated gases before entering the pump has the following advantages: Pump efficiency and pump rate will be increased. Elimination of CO2 and H2S gasses which can cause premature degradation of the stator elastomer.



There are two configurations of the PC Pump Gas Separator: 

Heavy oil configuration for oil less than 24˚API. 

Light oil configurations for oil greater than 24˚API.


Custom sized and configurations also available

Detailed Images
Packing





Related Products
FAQ

The PC Pump Gas Separator may be run into any progressing cavity well where it is suspect gas content is affecting the production performance. There are four main reasons why you would want to install a Gas Separator in your well.

1.The efficiency of your P.C. Pump is low. This can be caused by significant gas content in the fluids you are lifting.

2.Your PC Pump's working life is short. High gas content can cause the stator to burn up and break apart due to friction without lubrication as the rotator turns inside it.

3.Your pump elastomer experiences blistering when pulled from the hole. Over time gas becomes absorbed under pressure into the elastomer. Upon pulling the pump, the gas will want to escape to the lower pressure. This will cause the elastomer of your pump to blister.

4. You have torquing problems with your pump due to sand content. As the fluids and sand are pulled through the Gas Separator the centrifugal forces they experience combine them into a slurry which is easily producible by the PC Pump. 

We Recommend

0.004 s.